TCGE-0524-IR00
Drawing Hydraulic symbol
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Elt Fluid also reserves the right to modify all the above data, at any time.
Pressure drop
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Performance graph
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Drawing
Pressure drop
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Electric valve
1.11.002.1
0
50
100
150
200
250
03691215
0
1000
2000
3000
01234
Pressure bar
psi
Flow gpm
lpm
E08N-31
Description
Electric cartridge valve on/off, spool type, 3 ways, 2 positions.
Operation mode
A spring holds the spool in position to allow connection of 2 to 1
and 3 is closed.
When the solenoid is energized, the spool is shifted (pushed) to
allow connection of 2 with 3 and 1 is closed.
GENERAL DATA
Weight without coil: 0,15 Kg (0,33 lbs).
Ambient temperature range: -30 °C a 60 °C with standard seals (NBR).
Max. proof pressure: 300 bar (4.350 psi).
Flow Max: 12 l/min (3,2 gpm).
Cartridge materials: high strength steel, internal parts hardened
and grinding.
Solenoid valve 3 ways 2 positions,
direct acting spool type
Electric valve
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 210 bar (3.045 psi)
Flow rate: See Performance graph
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 80 cc/min
P max. 210 bar (3.045 psi)
Standard seals: O-ring NBR Seals Polyurethane
Cavity: SCN0830
Installation torque: 27 Nm
Coil nut torque: 2 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Seal kit std.: 5AG0021
ELECTRIC
Type of voltage: DC
Insulation index: H
Nominal voltage: +/- 10 %
Power at 20 °C: 20,5 W
ED*: 100% with ambient temperature range -20 °C
+40 °C
Coil code:
(see page 9.01.002)
S130-20S
*Note: For temperature or special conditions contact our sales department.
0
5
10
15
0 3 6 9 12 15
0
50
100
150
200
01234
Pressure bar
psi
Flow gpm
lpm
Flow
2 to 3
Flow 2 to 1
TCGE-0524-IR00
*Note: Information about manual
override is available at page S.001
Ordering code
SV- Screw in
PT- Push and twist
P- Push
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
STANDARD HOUSING
Ordering code: See page 9.02.002
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
Voltage
Seals
DN- Din
DU- Deutsch
AM- Amp Junior
2B- 1/4” BSP
3B- 3/8” BSP
2S- SAE 6
3S- SAE 8
24- Vdc
12- Vdc
Connector
None (std. without coil)
None (std. without override
)
Options*
None (std. only cartridge)
Housing size ports
A- Aluminium
Material std. housing
S- Steel
None (std. NBR)
Y- Polyurethane
For other options
contact Sales dept.
Inches
Millimeters
-
-
Dimensions
1.11.002.2






81)$
+H[









E08N-31
E08N-31



























